Cost guide
How much does a fence cost in Bakersfield?
Updated October 2026
As of October 2026, most residential fences in Bakersfield run roughly $10 to $55 per linear foot installed, according to published cost guides. Chain link is cheapest, wood and vinyl are mid-range, and ornamental steel or iron costs the most. It depends on height, the number of gates, how hard the ground is to dig, wind reinforcement and old-fence removal, so only a measured written quote gives your real price.
What does each material cost per foot?
| Material | Typical range |
|---|---|
| Chain link, galvanized or coated | About $10 to $30 |
| Wood, 4 to 6 ft | About $20 to $45 |
| Vinyl | About $25 to $55 |
| Aluminum | About $20 to $60 |
| Ornamental steel or wrought iron | About $30 to $85 |
Is there Bakersfield-specific price data?
Not much. One cost site published Bakersfield figures in June 2022 for a 4-foot fence: chain link at $11 to $15 per foot, wood privacy at $19 to $27, and vinyl at $29 to $37. Prices have generally risen since then, so treat those as a floor, not a current quote.
How much will gates add to my total?
Published guides, as of October 2026, put a basic walk gate at roughly $400 to $2,000 installed, and a driveway or security gate at roughly $2,000 to $12,000. Slide gates and openers land at the high end. See gates and openers.
What changes the price in Bakersfield?
- Wind reinforcement. Steel posts, post stiffeners and deeper footings on exposed lines add cost and add years.
- Ground. Hard, dry soil and buried debris slow post-hole digging.
- Height and style. Six-foot solid privacy costs more than open or shorter fencing.
- Gates. Each one adds heavy posts, hardware and labor.
- Removal. Taking out and hauling an old fence is usually its own line item.
- Commercial specs. Taller fabric, heavier gauge and security wire raise per-foot cost.
Which fence gives the best value here?
Chain link
Best value for enclosing space and containing dogs when you do not need privacy.
Wood on steel posts
Lowest-cost privacy that also stands up to wind, if you seal it.
Vinyl
Higher price up front, almost no upkeep in sun and dust.
Steel or aluminum
Long-lived open fencing for fronts, pools and driveways.
How should I compare quotes?
Get every quote in writing with posts, footings, materials, gates, removal and permit work listed separately. California requires a license from the Contractors State License Board (CSLB) for jobs of $1,000 or more in combined labor and materials, and the CSLB has a C-13 Fencing classification. Look up the license number on the CSLB site before you sign. Related: Bakersfield height limits.
Sources
NerdWallet, "How Much Does It Cost to Install a Fence" (updated July 2025); Inch Calculator, fence installation cost guide (gate ranges); HomeGuide, fence installation cost guide; HomeBlue, Bakersfield, CA fence cost (June 2022); CSLB AB 2622 notice ($1,000 threshold, effective January 1, 2025) and C-13 Fencing classification. These are published ranges for planning, not a price for your job.